Vorträge
-
(2023): Numerical and experimental investigation of temperature fluctuation on the plate surface induced by a coaxial jet flow, IHTC-17, Cape Town, South Africa
DOI: http://dx.doi.org/10.1615/IHTC17.330-70 -
(2021): Experimentelle Charakterisierung additiv gefertigter Kompakt-Hochtemperatur-Wärmeübertrager, 30. Deutscher Flammentag, 28. - 29.09.2021, Hannover-Garbsen
-
(2020): Charakterisierung von neuartigen Hochtemperatur-Wärmeübertragern und deren Optimierungsmöglichkeiten, Jahrestreffen der ProcessNet Fachgruppe Wärme- und Stoffübertragung, 12. März 2020, Erfurt
-
(2020): Auslegung von Wärmeübertragern mit unsicheren Parametern und stochastischen Betriebsbedingungen, Jahrestreffen der ProcessNet Fachgruppe Wärme- und Stoffübertragung, 12. März 2020, Erfurt
-
(2020): Stochastic Heat Transfer in Heat Exchangers, CHEW, IIT Roorkee
-
(2019): Numerical Simulation of Heat Transfer and Fluid Flow in 3D-Printed High-Temperature Plate-Fin Heat Exchangers with OpenFoam, 25th National Heat and Mass Transfer Conference, 28. - 31. Dezember 2019, Roorkee, Indien
-
(2019): Kondensation von R134a an dreidimensional strukturierten Rohroberflächen, ProcessNet-Jahrestreffen, 18. - 20. März 2019, Essen
-
(2018): Experimental investigation of an Organic Rankine Cycle equipped with an eccentric rotary expander and fluids R365mfc and R245fa, Lyon, Frankreich
-
(2018): Condensation heat transfer of R-134a on Single HorizontalThree-Dimensional Structured Tubes, 16th International Heat Transfer Conference, Peking, China
-
(2016): Qusi-dynamic model for simulation of a 400m vertical CO2 heat pipe for geothermal application, 9th International Symposium on Heat Transfer, 15. - 19. August 2016, Beijing, China
-
(2015): Dynamic Simulation and Control of a Refrigeration System, 2nd International Workshop on Compact Heat Exchangers for Aerospace Applications, 21. - 22. Dezember 2015, Bengaluru, Indien
-
(2015): The Single-blow Transient Testing Technique for Offset and Wavy Fins of Compact Plate-fin Heat Exchangers, 23rd National Heat and Mass Transfer Conference, 17. - 20. Dezember 2015, Thiruvananthapuram, Indien
-
(2015): Experimental Investigation of Condensation Heat Transfer of Refrigerant R134A on Horizontal structured Tubes, 7th Baltic Heat Transfer Conference, 24. - 26. August 2015, Talinn, Estland
-
(2010): Experimental investigation on natural circulation in a thermosyphon reboiler, 14th Int. Heat Transfer Conference, 8. - 13. August 2010, Washington DC, USA
-
(2005): An experimental investigation of fluid flow and heat transfer with nanoparticle suspensions in small helically coiled tubes, 1st Int. Conf. Micro- and Minnichannels, 21. - 23. April 2005, New York, USA
Beiträge in Tagungsbänden
-
(2021): Thermal performance measurement of additive manufactured high-temperature compact heat exchangers, 2021, Journal of Physics: Conference Series (2116)
DOI: 10.1088/1742-6596/2116/1/012095 -
(2019): Numerical Simulation of Heat Transfer and Fluid Flow in 3D-Printed High-Temperature Plate-Fin Heat Exchangers with OpenFoam, Proceedings of the 25th and 3rd International ISHMT-ASTFE Heat and mass Transfer Conference, IIT Roorkee, India, 28.-31.12.2019
-
(2010): Experimental investigation on natural circulation in a thermosyphon reboiler, 14th Int. Heat Transfer Conference, 8. - 13. August 2010, Washington DC, USA
-
(2005): An experimental investigation of fluid flow and heat transfer with nanoparticle suspensions in small helically coiled tubes, 1st Int. Conf. Micro- and Minnichannels, 21. - 23. April 2005, New York, USA
Originalarbeiten in rezensierten Zeitschriften
-
(2024): Cooling dynamics of droplets exposed to solid surface freezing and vitrification, Elsevier, Cryobiology 115 (2024) 104879
DOI: https://doi.org/10.1016/j.cryobiol.2024.104879 -
(2023): R410A and R32 condensation heat transfer and flow patterns inside horizontal micro-fin and 3-D enhanced tubes, International Communications in Heat and Mass Transfer, Elsevier
DOI: https://doi.org/10.1016/j.icheatmasstransfer.2023.106638 -
(2022): System Simulation and Analysis of an LNG-Fueled SOFC System Using Additively Manufactured High Temperature Heat Exchangers, Energies 2022, 15(3), 941
DOI: https://doi.org/10.3390/en15030941 -
(2022): Study on enhanced heat transfer performance of open-cell metal foams based on a hexahedron model, Numerical Heat Transfer, Part A: Applications, 16.06.22
DOI: https://doi.org/10.1080/10407782.2022.2078598 -
(2022): Influence of axial heat conduction in solid walls and fins on the overall thermal performance of an additively manufactured high-temperature heat exchanger, Applied Thermal Engineering 212 (2022) 118566
DOI: https://doi.org/10.1016/j.applthermaleng.2022.118566 -
(2022): Numerische Untersuchung des Abkühlverhaltens von eingetafelten Schokoladenprodukten, Chemie Ingenieur Technik
DOI: http://dx.doi.org/10.1002/cite.202200012 -
(2021): R410A flow condensation inside two dimensional micro-fin tubes and three dimensional dimple tubes, International Journal of Heat and Mass Transfer 182 (2022)
DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2021.121910 -
(2021): Conjugate heat transfer analysis of bubble growth during flow boiling in a rectangular microchannel, International Journal of Heat and Mass Transfer 181 (2021) 21828
DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2021.121828 -
(2019): The single-blow transient test technique using pulse change inlet condition with optimized pulse width and matching time, Heat and Mass Transfer
-
(2017): Dynamic simulation and experimental validation of a two-phase closed thermosyphon for geothermal application, Propulsion and Power Research, Vol. 6, Issue 2, June 2017, Pages 107-116
DOI: https://doi.org/10.1016/j.jppr.2017.05.002 -
(2016): The single-blow transient testing technique for offset and wavy fins of compact plate-fin heat exchangers, Applied Thermal Engineering
-
(2016): Bi-level heat exchanger network synthesis with evolution method for structure optimization and memetic particle swarm optimization for parameter optimization, Engineering Optimization, Vol. 49, No. 3, S. 401 - 416
-
(2012): Microstructual modification of the anode/electrolyte interface of SOEC for hydrogen production, International Journal of Hydrogen Energy 37, S. 12833 - 12838
-
(2012): Preparation and electrochemical behaviour of dense YSZ film for SOEC, International Journal of Hydrogen Energy 37, S. 12074 - 12080
Monografien
-
(2019): Design and Operation of Heat Exchangers and their Networks, Academic Press,
ISBN: 9780128178942 -
(2013): Wärmeübertragernetzwerke, VDI-Wärmeatlas, 11. Aufl., C5, S. 123 - 132